Turnstiles BA3 Series, Руководство пользователя

Страница: 11 / 12

11
EN
CONTROL MODULE
Symbol Description
OUT 1-3
Feedback signal output for left direction. The output consists of 3 pins that offer NO and
NC signal. Duration of the signal and moment of it’s occurrence can be configured in
the driver’s settings
OUT 4-6
Feedback signal output for right direction. The output consists of 3 pins that offer NO
and NC signal. Duration of the signal and moment of it’s occurrence can be configured
in the driver’s settings
AUX Output destined for extension modules use
LED Light signals output (diode pictograms)
PWR Power connector- 24VAC
FUSE Fuse- 5A slow type
ENC Rotor’s position encoder (5 pins)
BREAK Electromagnetic brake control voltage output
MOTOR Engine control voltage output
COIL_L Left direction coil control voltage output
COIL_R Right direction coil control voltage output
DROP ARM Arm dropping control voltage output connector
ENC_MEN Rotary encoder with button for menu navigation
SETTINGS MENU
Coils type
There are two options for each coil:
• NOR – normal coil, during power failure the rotor stays blocked.
• REV – reverse coil, during power failure the rotor stays unblocked
Default setting: NOR
Rotor speed
This setting defines the power of the engine that supports the movement of the rotor.
Possible values to choose from: 1-9
Default setting: 5
This option is not available in GA and BASIC series gates.
Fire alarm signal function
Fire alarm signal can function in normal closed mode or normal opened mode.
• NO – normal opened
• NC – normal closed
Default setting: NO
Initiating movement
This setting defines if the device should perform the initiating move.
Possible configurations:
• L – movement in the left direction
• R – movement in the right direction
• none - no initiating movement
Default setting: none
This option is not available in GA and BASIC series gates.
ZERO POSITION CONFIGURATION
After entering the configuration mode, set each of the arms in blocked position. Each of
the three positions has to be confirmed by pressing the encoder. Display shows the num -
ber of zero position which is currently being modified (0, 1 or 2).