turck TN-UHF AUS-CDS Series, Инструкция по эксплуатации

Страница: 189 / 225

V02.00 | 2020/08
189
Response
Loop counter See description of the input data, [ } 152]
Response code 0x042 (hex.), 66 (dec.)
Length See description of the input data, [ } 152]
Error code See description of the input data, [ } 152]
Tag within the
detection range See description of the input data, [
}
152]
Data (bytes) available See description of the input data, [ } 152]
Tag counter See description of the input data, [ } 152]
Write fragment no. 0
Read fragment no. See description of the input data, [
}
152]
Read data, Byte 0...(Length-1)
n
Status general: 1 byte general status
n
RF status: 1 byte status of the RF module
n Device status: 1 byte device-specific status information
n
RF mode: 1 byte, defines the reason for starting the read
operation
n
Trigger status: 1 byte, trigger number of the RF mode
n
I/O status: 1 byte, status of the inputs and outputs
(0 = low, 1 = high)
n
Ambient temperature: 1 byte, ambient temperature in °C
(data format: 8 bit, two’s complement)
n
PA temperature: 1 byte, PA temperature in °C
(data format: 8 bit, two’s complement)
n
RF antenna temperature: 1 byte, antenna temperature
in °C (data format: 8 bit, two’s complement)
n
Transmit power: 2 bytes, output power of the read/write
head in 1/10 dBm steps, LSB…MSB
(data format: 16 bit, two’s complement)
n
Reverse power: 2 bytes, returned reverse power in 1/10
dBm steps, LSB…MSB
(data format: 16 bit, two’s complement)
n
Antenna DC resistance: 4 bytes, resistance at the antenna
port in Ω, LSB…MSB
n
Jammer power: 2 bytes, input power at the RX port in
1/10 dBm steps, LSB…MSB
(data format: 16 bit, two’s complement)
n
Channel: Number of the currently used channel (offset
from the next available channel)
Read data, byte (Length)...127 Not required