turck TN-UHF AUS-CDS Series, Инструкция по эксплуатации

Страница: 187 / 225

V02.00 | 2020/08
187
8.5.19 Command: Backup settings of the UHF read/write head
The Backup settings of the UHF read/write head command saves the current settings of the
connected read/write head in the memory of the interface. The backup is retained also after a
voltage reset. The backup data can be restored via the
Restore UHF read/write head settings
command.
Request
Loop counter See description of the output data, [ } 156]
Command code 0x1001 (hex.), 4097 (dec.)
Read/write head address See description of the output data, [ } 156]
Length of EPC Not required
Start address Not required
Length Not required
Command timeout See description of the output data, [ } 156]
Write fragment no. 0
Read fragment no. See description of the output data, [ } 156]
Write data Not required
Response
Loop counter See description of the input data, [
}
152]
Response code 0x1001 (hex.), 4097 (dec.)
Length Not required
Error code See description of the input data, [
}
152]
Tag within the
detection range See description of the input data, [ } 152]
Data (bytes) available See description of the input data, [ } 152]
Tag counter See description of the input data, [ } 152]
Write fragment no. 0
Read fragment no. See description of the input data, [ } 152]
Read data Not required