turck TBEN-S2-2COM-4DXP, Инструкция по эксплуатации

Страница: 66 / 171

Commissioning
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com 60
Process data instances
Instance 103 and Instance 104
In- and output assembly instances with variable assembly sizes. The assembly size is pre-calculated
to support the stations I/O-configuration, enabled diagnostics, etc.
The effective size of the Assembly Instance can be determined using the Assembly Object (instance
0×67, attribute 0x04):
– Input data:
Input Assembly Instance: 103
0…470 bytes
default: 470 bytes
– Output data:
Output Assembly Instance: 104
0…400 bytes
default: 400 bytes
Process Data Mapping
The process data mapping of the TBEN-S2-2COM-4DXP for EtherNet/IIP™ corresponds to the pro-
cess data mapping described in chapter
Operating . But, in EtherNet/IP™, the status and the control
word are mapped before the process data.
 The mapping of the status and the control word can be deactivated via Gateway Class (VSC
100) , GW Status Word, page 70 or Gateway Class (VSC 100) , GW Control word, page 70 .
ATTENTION!
Activating/deactivating the status and control word in EtherNet/IP™
Changes in the process data mapping

Observe the changes in the process data mapping if the status and control word are
activated or deactivated.
IN Word
Offset Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Status
word 0 Module status
(
s. p. 136
)
Input
data 1
Process input data
(
s.
p. 129 )
OUT Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Control
word 0
(without function)
Output
data 1 Process output data
(
s.
p. 137 )