turck TBEN-S2-2COM-4DXP, Инструкция по эксплуатации

Страница: 141 / 171

135
2018/03
9.1.4 Evaluating Process Input Data –Module Status
Meaning of the Status Bits – Module Status
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Dec. Hex.
468 0x01D4
Under-
voltage V2
reserved
ARGEE
program
active
Module
diagnostics
pending
469 0x01D5
reserved
Force
Mode
active res.
Internal
error
Under-
voltage
V1
reserved
Process value Value Description
Module diagnostics pending 0 No error
1 Diagnostic message active
ARGEE program active 0 No error
1 The device contains an active ARGEE program,(
s. p. 163
)
Undervoltage V2 0 No error
1 System power supply V2 too low (< 18 V DC).
Undervoltage V1 0
No error
1 System power supply V1 too low (< 18 V DC).
Internal error 0 No error
1 Internal error, device-internal communication disturbed
Force Mode active 0 No error
1 Force-Mode in DTM active
The Force Mode is activated, no process data exchange
The output states may not correspond to the settings send from the
field bus.