turck TBEN-S2-2COM-4DXP, Инструкция по эксплуатации

Страница: 17 / 171

11
2018/03
5 Mounting
The device can be mounted on a DIN rail according to EN 60715 (TS35) or screwed onto a mounting
plate. Both composite and individual assembly are possible.
5.1 Mounting Module Composites
The TBNN-S0… adapters can be used to build module composites for group assembly.

Unlock the cover flap with a flat tool (e.g. screw driver) (1).

Open the flap completely (2).

To join the TBEN-S-module and the spacer, insert the key of the spacer into the slot of the TBEN-
S-module (3).

Flap back the cover and close it (4). It has to engage audibly.

Repeat steps 1 to 4 until the module group in complete.
Fig. 2: Build module groups four mounting the
devices onto a mounting plate Fig. 3: Build module groups four mounting the
devices onto a DIN rail (TS35)
1
1
2
3
2
3
4
4