turck TBEN-S2-2COM-4DXP, Инструкция по эксплуатации

Страница: 59 / 171

53
2018/03
7.4.3 Diagnostic messages via process data
The diagnostic messages of the COM and the DXP channels are directly mapped into the process
data (see
Process Data Mapping, page 60 .)
Additionally, the device's status word contains the module diagnostics: In the default setting of the
device, the status word is mapped before the device’s process input data (
s. p. 60 ).
Status word The status word contains the module status.

Evaluating Process Input Data –Module Status, page 136
or
Gateway Class (VSC 100) , Object Instance 2, gateway Instance, page 70
Control word
In the default setting of the device, the control word is mapped before the device’s process output
data (
s. p. 60 ).
The control word has no function.
Byte 1 (MSB) Byte 0 (LSB)
Bit
15 Bit 14 Bit
13 Bit
12 Bit
11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
res.
Force
Mode
active reserved
Internal
error
Under-
voltage
V1
res.
Under-
voltage
V2
res.
ARGEE
Program
Running
Module
Diagnostics
Available