Turbosol TB30, Руководство по эксплуатации и обслуживанию

Страница: 54 / 87

5
USE AND OPERATION
54/87
561405 - IS19/07 - EN
5 - USE AND OPERATION
5.1 ELECTRIC CONTROL BOARD
CONTROLS
1
2
4
6
8
7
3
5
16 15 14 13 12 11 10
9
Tab. 5-1A
1
EMERGENCY BUTTON
If pressed, it stops the engine.
2
IGNITION KEY
Key insertion/key disconnection/Engine off.
First click: general power supply.
Second click: the glow-plugs pre-heat takes place by holding the key in this
position. The engine can be started when the glow plug indicator light switches
off.
Third click: ignition. Release when engine has started.
3 //
CONTROLS ENABLE BUTTON
Press the button after starting the engine, in order to enable the electric board functions.
The pumping is inhibited when the hopper grid is opened. To restore the function, close the grid and
press the button //. The indicator light 10 lights up when the safety devices intervene; the indicator
light turns off, after closing the grid and pressing the button //.
4
PUMPING
Stable position. The pumping is enabled in this position. The pumping is started and stopped by
means of the remote control via cable or radio remote control.
5
INTAKE
Stable position. The intake is enabled in this position. The intake is started and stopped by means
of the remote control via cable or radio remote control.
6
VIBRATING SCREEN
Stable position. The selector enables/disables the motor vibrator on the hopper grid.
7
REMOTE CONTROL
Stable position. The selector enables the local / remote control.
8
HORN
Unstable position. Button for acoustic warning.