34
250 grams of seed in the calibration tray, per hectare is then 100 x 0,25 kg = 25 kg. NOTE: The
vibration of the machine while driving can slightly increase the actual and practical sowing amount
compared to the calibration, especially when compared with small amounts of seed. Monitor the
consumption of seeds as the sowing progresses.
Note! Always remember to return the pins back to the feeder shafts before sowing.
HS-machine can be disabled by removing the ring-pin in the end of the feeder shaft and by
moving it to the free hole in the end of the shaft. In this case the chain-wheel rotates freely on the
feeder shaft. HS-machine mixer shaft (accessory) can be disabled as needed by removing the
pin in the end of the mixer shaft use end inside the tank.
Make sure, that when filling the tanks, no hard objects fertilizer dumplings etc. enter the tank and
could potentially damage the feeder equipment.
Very small grains of sowing material can fit the adjustor sleeve between the sowing chamber and
top of the feed roller. This can lead to tension adjusting the sowing amount with the handwheel.
In this case the device must always be rotated some turns whenever the adjustment control starts
to feel stiff.
Seed dressing
SAFETY PRECAUTIONS WHEN USING THE SEED DRESSING
•
All handlers of seed dressing and mordants must read this manual and the manual of the
mordant used. Mordants are toxic.
•
In the mordant handling it is mandatory to use personal protective equipment such as
gloves, face protection, respiratory protection and protective clothing. More detailed
instructions are found in the mordant manual i.e. on required respirators.
•
Make sure that children or animals do have access to mordant soiled parts.
•
If you must wash the seed dressing ( i.e. when changing mordant), make sure the water
used is handled appropriately ( drained, absorbed etc).
•
If such seeds are sown, where no seed dressing is desired (e.g. rapeseed) the seed
dressing feed troughs must be removed. Even a small amount of mordant may damage
the type of seeds for which the mordant is not meant (i.e. germination).
•
The unused treated seeds are hazardous waste which must be disposed in an appropriate
recycling point.
Содержание Nova 3000 Star
Страница 38: ...38 ANNEX 2 LUBRICATION CHART...
Страница 39: ...39...