Tume Nova 3000 Star, Руководство пользователя

Страница: 10 / 40

10
FIG. 1. Supporting wheels. FIG. 2. Adjusting the working depth.
Drive unit installation
Drive unit is assembled according to fig. 3 where the mounting of the drive unit to the machine
can also be seen. Note, that drive unit is always mounted to the upper holes of the machine’s
lower brackets. The hydraulic push rod is mounted also to its upper hole.
Hydraulic hoses and electricity wires are connected to the drive unit carefully so that they cannot
be damaged in any driving situation (i.e. driving the tractor into an obstacle). Thread the tubing
through the inside of shaft housing.
FIG. 3. Drive unit.
Adjust the length of the push rod so that the machine is lowered and, in the tractor trailer hitch,
the wheel intermediate roller or intermediate processing device are connected horizontally.
Ensure, that the push rod cylinder is in its lowest position when adjustment is carried out. Focus
of drive unit is done in the field in sowing conditions.
Connecting the machine to tractor
Nova Combi is normally connected to the tractor drawbar. We do not recommend connecting the
machine to the tractor drawbar attached to the arms, because it makes the tractor front end lighter
and reduces maneuverability.