Tume Nova 3000 Star, Руководство пользователя

Страница: 14 / 40

14
Filling method
The filling height of the machine is quite large and container volume is large. For this reason, we
recommend that for the filling method is used jumbo bags (
NOTE : sufficient lift equipment), or for
example, the filling screw technology.
Jumbo Bags can be treated with a variety of loaders. Do not go under a hanging load. Jumbo
bag may not be put on the till seed drill structures. Do not overload the drill. Find out about the
methods to partially drain a jumbo sack.
9. DRAINING OF CONTAINERS
Draining of fertilizer tank
Fertilizer tank is usually emptied through the coulters. Adjust the output control to its maximum
position; for example, spread the load cover under the machine and lower the fertilizer side
drawer bottom flaps lever all the way down. In this case, the tank empties almost completely.
Guide the remaining fertilizer with a brush, or something similar, to the plenum. Rotate the feeder
with a crank for a few turns, so that the chambers empty out. Finally, swing the bottom flaps with
the lever quickly a few times, so that no fertilizer is left on top of the flaps.
Draining the seed tank
Seed tank is drained the same way as fertilizer tank. Do not mix seeds and fertilizers when
draining the machine.
10. SEED FEEDING MECHANISM AND CONTROLS
Feeder is formed by helical rollers, bottom flaps with springs and adjustable shutters (Fig. 9).
Feed chambers are located in the tank bottom. With this solution is it is possible that the sowing
quantity can remain almost the same regardless of drill tilting side or direction of travel. Feeding
equipment is made of corrodible materials. Bottom flaps below the feed rollers are adjustable,
control lever is in the middle of the machine in the back (Fig. 9). For sowing of the small seeds,
the transmission gear ratio can be changed by turning the transmission cartridge.