Draco 3000 / Draco 4000
34
When the camera is switched on (button 12, picture 47), the sowing menu screen changes to the
one shown in picture 50. The logos in the buttons and functions become smaller so that the image
shown on the camera is as large as possible on the screen.
All functions can be used, but adjustable / set values cannot be changed when camera is in use: the
buttons on the bottom of the screen (picture 47, buttons 5-11 and 17-19) function in the same way
as in the sowing menu without the camera.
Instead, the setting values of buttons 1 – 4 and 13 – 16 (vertical in the edges) cannot be changed:
areas cannot be reset, changes to tramline stage cannot be made manually, the sowing quantities
of fertilizer and seed cannot be changed in the memory spot, but fertilizer's memory spot can be
changed from one spot to another when changes in the soil type so require. If the values of the
aforementioned buttons should be changed, the camera mode must be removed by pressing the
screen on speed display section, picture 50, when we return to the basic sowing menu, picture 47:
all values can then be freely changed.
Picture 50. Sowing menu when camera function is in use.
(see picture 47, sowing menu without camera function)
On the top right corner in picture 50 there is a camera icon with a letter A. This means that camera
A is selected and its picture is shown in the middle of the screen. By pressing this icon you can
switch between the cameras. If A+B is selected the picture will change automatically after few
seconds between cameras A and B.
11.5.13 Fertilizer feed amount, memory spot 1 and fertilizer calibration
11.5.14 Fertilizer feed amount, memory spot 2 and fertilizer calibration
11.5.15 Fertilizer feed amount, memory spot 3 and fertilizer calibration
Tume Draco has three quick picks, i.e. memory spots for the amount of fertilizer feed. They are all
equal: they can all be changed separately. Calibration can also be made optionally using any of
them.
The fertilizer feeding devices are equipped with spiral rollers below them there are adjustable bottom
flaps. There are two adjusting levers, at both ends of the machine, pictures 51 and 2.
