A CONDENSED OPERATING
INSTRUCTIONS
- Place the locking pin in the position of the calibration scale
which ensures the required output (round end of pin for
rates listed in the chart; flattened end for intermediate
output rates).
- Adjust the machine for full field or headland spreading.
- Ensure the correct height of the spinner discs over the
ground or crop.
When spreading on headlands: reduce height if the fertili-
zer is thrown over the side of the plot.
- Adjust the forward inclination.
- Use, as much as possible, the minimum PTO speed which
goes with your planned working width.
- Reduce your PTO speed if the fertilizer is dropped beyond
the plot side during headland spreading.
- Clean the machine after every operation and carry out the
necessary maintenance.
61
Supplement A
60 cm
