TuffStuff BRT-1 Скачать руководство пользователя страница 24

Страница: 24 / 26

BRT-1 “The Brute” Plate Loaded Home Gym

FIG. 68

Seat / Back Pad Settings:

Illustration of the

Seat / Back Pad

gradual adjustment settings ranging

from Decline Position to Upright Position.

♦

Settings 1-2 used for Flat Position

♦

Settings 3-10 used for Incline Position

FIG. 69

Seat / Back Pad

Adjustment:

1. Grasp the

Seat Pad (#24).

2. Pull the Push Pull Pin 1/2 X 3 1/2 (#43).
3. Adjust the

Seat / Back Pad

to the desired position.

4. Release the Push Pull Pin 1/2 X 3 1/2 (#43) and make sure it fully en-

gages into the selected hole of the

Base Frame’s (#1)

Bracket.

FIG. 70

Seat Pad (#24)

Adjustment:

1. Grasp and raise the

Seat Pad (#24)

2. Flip the

Seat Elevation Bracket (#14)

to upright position.

3. Rest the

Seat Pad (#24)

on top of the

Seat Elevation Bracket (#14).

FIG. 71

Leg Hold Down Frame (#22)

Adjustment:

1. Grasp the

Leg Hold Down Frame (#22)

2. Pull the Push Pull Pin (#43).
3. Bring the

Leg Hold Down Frame (#22)

to horizontal position.

4. Release the Push Pull Pin (#43) and make sure it fully engages into the

hole of the

Leg Hold Down Frame (#22)

Note:

Bring the

Leg Hold Down Frame (#22)

to the lower position

when not in use.

Adjustment Features

NOTE:

Содержание BRT-1



























Результаты поиска

Содержание BRT-1

Отзывы:

Похожие инструкции для BRT-1

Бренды по названию

Популярные бренды

TuffStuff BRT-1, Руководство пользователя

Результаты поиска

Содержание BRT-1

Отзывы:

Похожие инструкции для BRT-1

Бренды по названию

Популярные бренды