FIG. 48
Attach the two Metal Hinges (#44) to the axle of the
Channel
Seat Frame (#13)
. Be sure to position the Metal Hinges (#44) as shown
above.
FIG. 49
Place the
Seat and Back Pad Cover (#46)
on top of the
Incline
Bench Channels (#16, #17)
and the
Channel Seat Frame (#13)
.
The picture depicts position of the Hex Head Cap Screws 3/8-
16 X 1 1/4 (#76) passing through the Metal Hinges (#44) and the
Seat
and Back Pad Cover (#46).
FIG.50
Attach the
Seat Pad (#24)
to the
Cover (#46)
and the Metal
Hinges (#44) using the previously described Hex Head Cap Screws 3/8-
16 X 1 1/4 (#76), and two Flat Washers SAE 3/8” (#84).
FIG. 51
Attach the
Flat Incline Pad (#23)
, in the position as shown
above, to the
Cover (#46)
and the left and right
Incline Bench Channels
(#16, #17)
using four Hex Head Cap Screws 3/8-16 X 3 1/2 (#82), and
four Flat Washers SAE 3/8” (#84).
14
BRT-1 “The Brute” Plate Loaded Home Gym
Owner’s Manual: Assembly Instructions
