FIG. 44
Attach the
Seat Elevation Bracket (#14)
, in the position as
shown above, to the
Channel Seat Frame (#13)
and secure it into place
using one Hex Head Cap Screw 1/2-13 X 4 1/4 (#72), two Flat Washers
SAE 1/2” (#68), and one Nylon Insert Jam Lock Nut 1/2-13 (#75).
FIG. 45
Insert the
Incline Bench Elevation Tube (#15)
, in the position
as shown above, into the receptacle located on the
Base Frame (#1)
. Be
sure to disengage the Push Pull Pin 1/2 X 3 1/2 (#43) as you begin insert-
ing the
Incline Bench Elevation Tube (#15)
into the
Base Frame (#1)
.
Confine the
Incline Bench Elevation Tube (#15)
within the
Base Frame (#1)
receptacle using the Shoulder Bolt 3/8 X 3/4 (#86). Use
the supplied Hex Hey 3/16” (#92) to fasten the Shoulder Bolt 3/8 X 3/4
(#86).
FIG. 46
Locate the left and right
Incline Bench Channels (#16, #17)
and apply a thin coat of grease to the inside walls of the Channels.
FIG. 47
Connect the left and right
Incline Bench Channels (#16, #17)
,
in the position as shown above, to the
Channel Seat Frame (#13)
and the
Incline Bench Elevation Tube (#15)
.
13
BRT-1 “The Brute” Plate Loaded Home Gym
