USING THE SEATBELT
To engage the seatbelt, push the fork inside the clasp. Press
the fork tabs in the clasp to open the seatbelt.
Adjust the tension of the seatbelt accordingly by pulling on the
end strap on the fork side.
USING THE WHEEL BRAKES
1.
Locate the handles on either side
of the wheelchair in front of the
wheels.
2.
Push the handle bar on the brake
forward to activate the wheel brakes,
pull back to release brake.
- 13 -
ADJUSTMENTS
ADJUSTMENTS
ADJUSTING THE SEAT HEIGHT
Rise the seat height by reposition the rear wheel mounting plate.
Note: When rising the seat height, front caster need to be
exchange with 8” casters.
1.
Locate the quick release axle mounting plate on the main
frame of the wheelchair. Remove the two screws holding the
mounting plate to the frame.
2.
Adjust the plate by positioning it on the
mounting tube of the wheelchair to the
prefered height. The seat height is at 18”
by default, moving the plate to the middle
position will raise the seat to 19” , move it
to the lower setting will raise the seat to
20”.
3.
When adjusted to the prefered
height, replace the screws and
tightly seal close with the screw
nuts and washers. Repeat on the
other side and reinsert the wheels
into the knob.
- 14 -
