WARNING
DO NOT attempt to transfer until the user is assessed by
a qualified professional. Please thoroughly read and fully
understand the instructions in this Owner’s Manual.
- 24 -
4.
To use the anti-tipper when going up ramps or inclines, lean
the chair backwards and balance on the back wheels. If there
is no assistant for the patient, the patient must learn forward
in wheelchair while using the hand bars on the wheels to go
up a ramp or incline.
3.
For active users who don’t require the assist of the anti-tipper.
Press and hold the locking pins on both sides of the end tube,
rotate the anti-tipper wheels upwards to move it out of the way.
- 23 -
1.
The anti-tipping wheels of the wheelchair are located at the
back of the wheelchair, adjacent to the main wheels. These
are used to prevent tipping over backwards when going up
ramps or inclines.
USING THE REAR ANTI-TIPPER
2.
To adjust the tipping height of the wheelchair, press the two
release buttons on the telescoping lower tube, then adjust the
height of the lower tube so that wheel is within 1-1/2” to 2” off
the ground.