2d.
Press the button located
at the center of the wheel and
insert it into the receptacle hole.
2e.
Release the button and make sure the two balls at the end
of the axle shaft protrude pass the receptacle tube to secure.
Repeat on the other side.
2f.
Press the button located at
the center of the wheel while
pulling the wheel outwards to
detach.
- 9 -
- 10 -
ATTACH THE ANTI-TIPPERS TO THE WHEELCHAIR
3a.
Locate the end pipe of the back wheel on the back of the
wheelchair.
3b.
Insert the anti-tipper into the end pipe until the locking pins
locked in place. Repeat on the other side.
3c.
When anti-tipper is not
needed, press and hold the
locking pins on both sides of
the end tube, rotate the anti-
tipper wheels upwards to
move it out of the way.
