ADJUSTING THE ANGLE OF THE CASTER WHEEL
1.
The degree of the caster wheel angle can be adjusted by
removing the screw from the caster stem and rotating the
hexagonal dial plate.
2.
Rotate the hexagonal dial plate to change the caster to the
prefered angle and screw tightly close.
ADJUSTING THE HEIGHT OF THE ARM RESTS
1.
Locate the release button on the side of the side panel
below the armrest.
- 17 -
2.
While pressing the button, pull up or push down the arm
pad to the prefered height. Once the arm height is adjusted,
release the button to secure the arm in place.
USING THE SWINGBACK ARMS
1.
Locate the arm lock of the swingback arm at the bottom of
the arm, in between the seat and the wheel lock.
- 18 -