ATTACH OR DETACH THE REAR WHEELS FROM THE
WHEELCHAIR
2a.
Locate the rear wheel axle receptacle hole on the side of
the wheelchair below the back post. * Make sure the wheel
lock is disengaged to avoid obstacle to the wheel.
2b.
Align the quick release axle with the connecting receptacle
hole on the wheel mounting plate.
- 8 -
1f.
To keep the lower part of
back upholstery from moving,
secure the bottom part of it to
the frame with the two velcro
cable ties provided.
- 7 -
1c.
Insert the back posts into the connecting pipes. Adjust the
back upholstery to the user’s prefered height, line up the
screw holes on the back post to the hex hole on the connecting
pipe.
1d.
Insert the mounting bolt from out side of the frame. The
hole on the outside is a hexagon shape, the hexagon head
of the bolt should sit in the space nicely. Secure on other side
of the bolt with a black cross knob.
1e.
If the seat belt is needed, insert the brass loop holes at
the end of the seat belt between the backpost bolt and knob
and tighten.