20
TROUBLESHOOTING
Check all gas connections and that the
gas bottle has gas.
Check the ignition for a spark and adjust the spark
gap to make sure the gap is 5-7mm from the ports on
the burner.
Barbecue won’t light?
Ignition is not working?
Check that the ignition leads are connected
properly as the ignition lead might just need to be
firmly connected into either the ignition probe or the
ignition button correctly. The lead may be damaged
also.
Check the throat of the burner for a blockage, re
-
move the air mixture cap and gauze on the throat of
the burner and push a screwdriver up it to clear the
blockage.
One of the burners won’t light?
Remove the knobs and spray the valve shaft with
unceasing lubricant then oil the shafts of the control
valves and replace the knobs.
Control knobs are stiff?
TROUBLESHOOTING SOLUTIONS
Check the injector nipple that supplies the gas to the
burner it maybe has a blockage.
Valve injector
Propane / L.P. Gas is heavier than air so your
ignition probe should be positioned just lower
than the ignition ports for the best position for
ignition and Natural gas is lighter than air so it is
best to adjust the ignition probe a little higher
than the ignition ports on the burner for the best
position for ignition.
