11
BARBECUE GAS CONSUMPTION
TUCKER GTR BARBECUES ARE MADE AND
APPROVED TO AUSTRALIAN STANDARDS A.G.A.
APPROVAL NO. AGA 8236-G
SPECIFICATIONS
(In Mega Joules Per Hour)
Model
Natural Gas
LPG:
GTR3
39mj
40.5mj
GTR4
52mj
54mj
GTR5
65mj
67.5mj
GTR6
78mj
81mj
Natural Gas injector size 1.7mm Pressure 1KPA
Propane Gas injector size 1 mm Pressure
2.75 KPA
Model
Natural Gas
LPG:
Integrated
S Wok/ST Wok
12.5mj
15mj
Natural Gas injector size 1.8mm Pressure 1KPA
Propane Gas injector size 1.1 mm Pressure
2.75 KPA
Model
Natural Gas
LPG:
Integrated SS Wok
17mj
18mj
Natural Gas injector size 1.9mm Pressure 1KPA
Propane Gas injector size 1.1 mm Pressure
2.75 KPA
For LP Gas connections, an approved 2.75 KPA
regulator and hose assembly connection to the
appliance is fitted by the manufacturer.
The appliance inlet is 3/8 S.A.E. male and is located
in the base of the BBQ, on the right hand side at the
front.
The minimum capacity propane cylinder for this
barbecue is 4 KG.
The intended use of this barbecue is to be installed
into a Tucker GTR Cabinet Trolley, Pedestal Trolley,
Chef Stand or into a Tucker Insulation Jacket.
Alternatively, it may be set into brickwork.
Be sensible about the location of your barbecue.
The barbecue must be located on firm and level
ground.
Do not
locate the barbecue near combustible
materials or surfaces, either above or around the
barbecue.
Do not
obstruct any of the air ventilation openings on
the front of the barbecue.
Warning in freezing conditions the pressure of
Propane gas can be reduced in the Cylinder
Tank causing a lack of gas pressure, this may
affect the way the barbecue operates.
