15
CONNECTION OF A GAS CYLINDER TO THE
BARBECUE IS AS FOLLOWS
The hose assembly connection to the appliance is
fitted by the manufacturer.
1. Attach the regulator to the gas cylinder by
tightening the wing nut on the regulator firmly by
hand.
2. Once connected, leak test the connections by
brushing a solution of soapy water around the
joints and gas cylinder valve.
Photo of what a typical leak looks like.
Photo of what a typical leak looks like.
Photo of what a good connection looks like i.e. no
bubbles.
If bubbles appear around the connections,
you have a leak.
GAS INSTALLATION AND
LEAK TEST PROCEDURE
Turn off the gas supply and tighten or re-seal
the connection.
Leak test the connections again.
If leaks are still present do not use the barbecue,
contact the place of purchase or your local dealer.
There must be no naked flames in the area
when connecting the barbecue to a gas
supply.
You must have the control knobs in the off
position and have the gas supply on at the
cylinder valve to test for leaks.
