5
GTR SUPPORT KITS, HOOD AND LID
1. Remove the grease tray from the BBQ to install
the BBQ fascia with one of the kits.
Tucker GTR BBQs can be installed into a
non-combustible material with one of the
following Kits.
GTR BBQs can be installed with either a Flat Hinged
weather cover/ Lid or a Roasting Hood.
Make sure to read any separate instructions
on
Assembly, Installation and Operation of the Roasting
Hood and / or Wok Burner if they are to be fitted to
the BBQ.
- GTR Angle Support Kit
- GTR Side Panels Support Kit
GTR ANGLE SUPPORT KIT ASSEMBLY
2x
Side Angles
2x
Fascia Brackets
4x
M6 Bolts
2x
Small Bolts
2x
Nuts
2x
Spacers
4x
Washers
To install GTR BBQ into Non-combustible you must
have one of the kits, depending if it’s going to
be hanging or sitting on the benchtop.
If you have a Flat Hinged Weather Cover/Lid,
attach the Lid onto the back of the BBQ with the
Phillips head bolts provided with the lid.
GTR Angle Support Kit Parts
