7
TTL air curtain systems - Controller TWICS
4. Qick -Start -Guide
c
Connect the control lines resp. check them
air curtain unit — controller TWICS
air curtain unit — automatic contact (if possibly)
air curtain unit — room thermostat (if possibly)
If necesarry. control lines at groupings
d
Switch-on power supply for air curtain unit(s)
e
Controllers prompt by start screen
(display of controller type, version and status of software status)
f
After appr. 2 seconds automatic change of display figure into display power indicator
with the operation mode OFF
g
Operating via TTL - TWICS controller
Operation mode MANUAL/HAND:
chooce of air volume with the navigator range buttons
(air output power will be shown as a continual bar or a stage)
setting
SUMMER/WINTER
mode
Operation mode AUTOMATIC:
Check preselected parameters like:
• preselected value for air outlet power
• adjustment SUMMER/WINTER mode
• preselected value for overrun time (after closing the door)
(if door contact is connected)
• preselected stage for heating mode (while closed door)
(if room thermostat and door contact is connected)
h
Changing of preselections/programmings. Thereto press the button „SELECT“ for
2 seconds, transition into the main menu and choice of the corresponding main menu or
submenu points.
Checking resp. setup of secondary and additional operating parameters like
frost protection programming (RESET)
adjustment of the selected temperatures to the local conditions
