TSI Power Corporation MC80023,4,5,6,7,8,9,30
ATS-500 Series Automatic Transfer Switches Rev. 7, September, 2019
TSI Power Corporation Proprietary Information
7
•
T
ransfer time between sources in under one cycle which is fast enough for
even the most sensitive loads.
•
Audible alarm with enable / disable switch provides for unattended security.
•
LED status indicators for quick visual displays of fault conditions.
•
Higher than 99% efficiency means substantial energy savings (when the ATS
is used as a battery-less UPS).
•
Remote monitoring is provided through a DB9 port.
•
70-90% reduction in both CAP-EX and OP-EX (when the ATS is used as a
battery-less UPS).
•
Built-in primary and backup rocker style circuit breakers are highly visible and
easily accessible on rear of unit.
•
The ATS allows redundant AC power to mission-critical equipment using any
combination of UPS, backup generator or other available autonomous AC
power sources.
•
Sturdy steel enclosure can be rack, wall or floor mounted with optional
mounting brackets. For other mounting options consult your local TSi sales
associate.
•
AC Inputs are galvanically isolated.
•
RCD (Residual Current Device) compatible.
1.4
OVERALL DIMENSIONS
The ATS-500 enclosure dimensions are 11.25" (286 mm) wide x 3" (76 mm) high x 10"
(2254 mm) deep for Plugs and Receptacles units and 11.5" (292 mm) deep for Hardwire
units
–
see Fig. 3.
Figure 3: ATS-500 Dimensions for Hardwire Units Shown (black polyester coating
shown)
3" (76 mm)
Audible Alarm
On/Off Switch
Green, Yellow & Red
Status Indicator LEDs
11.25" (286 mm)
83mm
11.5"
(292
mm)
