TSI Power Corporation MC80023,4,5,6,7,8,9,30
ATS-500 Series Automatic Transfer Switches Rev. 7, September, 2019
TSI Power Corporation Proprietary Information
14
Note: If the output load current exceeds 125% of the circuit breaker ratings (15, 20, 30 or
40 A), then the input circuit breaker(s) will trip and prevent the possibility of overheating
of the components or wires inside the ATS Series units. Reduce the load if the circuit
breaker trips. If the circuit breaker trips, even without any load, then there is a faulty
component on the board assembly. The Board assembly must then be repaired at the
factory (or replaced in the field).
P/N FC00114-15 A & P/N FC00116-30 A Breaker P/N FC00065-40 A
Breaker P/N FC00115-20 A Breaker
Figure 11: Primary & Backup Type AC Input Two-Pole Circuit Breakers-15, 20, 30 &
40 A
2.4
AUDIBLE ALARM SWITCH (See Figure 12)
Figure 12: Audible Alarm On/Off Switch
3.
INSTALLATION
3.1 SITE SELECTION & PREPARATION
•
This product is intended for installation in “A PROTECTED ENVIRONMENT
ONLY”.
IMPORTANT: ONLY QUALIFIED PERSONNEL SHOULD PERFORM THE
INSTALLATION OF THIS PRODUCT.
