TSI Incorporated SIDEPAK AM510, Руководство пользователя

Страница: 28 / 74

Chapter 3 20
achieved. After the pump has achieved the flow rate setpoint, it will go
into Survey Mode.
Power Down
To turn the SidePak AM510 off, press the PAGE key until the
instrument displays SURVEY MODE. Then,
press and hold the PAGE
key. Release the key after the 3-second countdown reaches zero.
Survey Mode
When the SidePak monitor is first turned on, it will always go into
Survey Mode. In Survey Mode the instrument displays real-time
aerosol concentration readings in units of milligrams per cubic meter
(mg/m
3
). Data logging is not enabled during Survey Mode.
While in Survey Mode, use the ▲ ▼ keys to view the:

Percentage of memory available

Battery life remaining displayed in minutes

Time of day

Today's Date

Current calibration factor
Note : While in the Survey Mode, if you view another display
screen and leave the display in this location, the AM510
display returns to the next higher level menu after 30
seconds. Eventually, it returns to the Survey Mode,
showing real-time aerosol concentrations.
Main Menu
When in the Survey Mode, you can access the Main Menu by
pressing the PAGE
key. Use the ▲ ▼ keys to select one of the
following sub menus:

Data Log

Setup

Statistics

Zero Cal
Refer to the corresponding section below for details on each sub
menu.