TSI Incorporated SIDEPAK AM510, Руководство пользователя

Страница: 30 / 74

Chapter 3 22
Run Manual immediately starts a data logging session (called a
"Test").
Press

or PAGE to stop a test in progress. The AM510 will ask
you to confirm that you want to stop the test or not, while data
logging continues. If you choose to continue (Return) by pressing
the PAGE
key, there will be no break in the data.
While running a manual test, the display shows LOGGING DATA
as well as the last data value recorded. Manual tests use the
logging interval defined in Log Interval under the Setup Menu.
Each test you run is assigned a sequential number (e.g.,
TEST#1, TEST#2, … TEST#100) until memory is used up or
cleared.
When a test is stopped, the display immediately switches to the
Statistics Menu where you can view the following statistics for
any stored test:

Maximum reading

Minimum reading

Average reading

8-hour TWA

Time (duration of test)
First, select the test to view with the ▲ ▼ keys and press

. Now,
you can page through the available statistics using the keys.
Initially, the test you just completed is offered. You can view test
statistics any time you are not actively data logging by selecting
Statistics under the Main Menu.
Run Prog 1 and Run Prog 2 allow you to execute a data logging
test that was preprogrammed using T
RAK
P
RO
TM
Data Analysis
Software. Preprogramming allows a great deal of flexibility that is
not available with manual logging such as predefined start and
stop times, logging intervals, calibration factors, and more. See
“
Programming Prog 1 and Prog 2 with TrakPro Software
” later in
this chapter.
During data logging, use the ▲ ▼ keys to view:

Battery life remaining displayed in minutes

8-hour TWA

Elapsed time

Current time and date

Log interval