Tryton TJS40, Руководство по эксплуатации

Страница: 9 / 72

9
Angle Grinder , Safety Warnings k )
Personal safety:
a) Release the On/Off switch and set it to the off position when
the power supply is interrupted, e. g., in case of a power
failure or when the mains plug is pulled.
This prevents
uncontrolled restarting.
b) When working stone, use dust extraction. The vacuum
cleaner must be approved for the extraction of stone dust.
Using this equipment reduces dust-related hazards.
c) Use a cutting guide when cutting stone. Without sideward
guidance, the cutting disc can jam and cause kickback.
d) When working with the machine, always hold it firmly with
both hands and provide for a secure stance.
The power tool is
guided more secure with both hands.
e) Secure the workpiece. A workpiece clamped with clamping devices
or in a vice is held more secure than by hand.
f) Never use the machine with a damaged cable. Do not touch
the damaged cable and pull the mains plug when the cable is
damaged while working.
Damaged cables increase the risk of an
CONSTRUCTION AND APPLICATIONS OF THE GRINDER :
electric shock .
WARNING!
The tool is not suitable to machine plaster surfaces or other strong dust-
a) producing materials. Small dust particles by penetrating into the tool
block ventilation spaces, which results in overheating and burning the
motor.
This electric tool is designed for jobs with medium intensity. It is not
b ) WARNING: In case of damage or improper use of the battery, suitable for long-term operation under heavy duty conditions. Do never
explosive gases might be released. The battery must be kept use the tool for applications that need use of professional
away from fire and proper ventilation is to be assured during
equipment.
charging. It cannot be left for a longer period of time in a high
temperature environment (areas with strong exposure to the sun, close
to radiators or any other place with a temperature above 40 degrees).
c )
d ) Batteries can be charged exclusively with use of a power
adapter recommended by the manufacturer of the tool.
Application of any other power adapter may pose a risk of a fire.
e)
f)
g )
h )
i )
j )
Never charge a damaged battery.
The batteries are intended for multiple use and contain
harmful lithium.
Upon the battery lifetime expires the battery must be disposed
in accordance with environmental regulations. Discharge the
battery first top the empty state and remove from the electric tool. Hand
over to an organization that deals with utilization of batteries or take it
back to the shop where the tool had been purchased.
Using the charger:
a) Use only dedicated power adapters to charge the battery.
Application of a power adapter dedicated to charge another type of the
battery unit poses a risk of fires.
b) Do not disassemble the charger.
c) The charger is designed exclusively for indoor use. It must not be
exposed to water or moisture.
d) Charge only in an ambient temperature between 15-25
degrees.
e) Do not insert metal objects of any kind into the charger.
The TJS40 cordless angle grinder is a handheld power tool designed for
Safe use of rechargeable batteries
dry cutting, grinding and brushing od metal and stone, as well as for
and battery chargers -
cutting ceramic tiles and concrete stone.
Using the battery:
Use only the batteries that correspond to specifications
required by the equipment manufacturer.
Use of unsuitable
batteries may lead to cracks and destruction of the battery, personal
injuries or fires.
Each application of the tool not in line with the intended use as specified
below is strictly forbidden and makes the warranty terms null and void.
The manufacturer shall not be held responsible for possible
The battery must be charged within the temperature range consequential damage that may arise due to or in connection with such
of 15 to 25ºC. application.
Any modifications of the tool by the user relieve the manufacturer from
responsibility for any damage and injuries to the user and the
surroundings.
Never expose the battery to the effect of water or moisture. Application of the tool in accordance with the intended use also refers to
its maintenance, storage, transportation and repairs.
When another battery is to be charged in sequence the time
gap between charging operations must be not less than 30
Defective electric tools can be handed over for repairs exclusively to
minutes. service workshops appointed by the tool manufacturer. Battery-
powered devices should be repaired only by authorised persons.
In no case may you open the battery.
Proper use cannot guarantee that no residual risk will occur. Due to the
Under unfavourable conditions electrolyte may leak from
design of the machine, the following risks may occur:
batteries, be careful to avoid contacts with the liquid. In case
- Touching of the working accessory during its operation within the
of accidental contacts with the liquid wash the affected
unshielded area of the tool ;
locations with water. When liquid penetrates eyes, seek also
for medical assistance.
The liquid that leaks from batteries may be - Scalding while the working accessory is being replaced (During its
a reason for irritation or scalds. operation the working accessories are getting extremely hot. To avoid
scalding operators must wear protecting gloves to replace the working
When the battery unit is not in use keep it far away from
accessories;
metallic items such as paper clips, coins, keys, nails, bolts or
- Throwing a machined part or pieces of a machined part ; other metal things that may short the battery terminals.
Shorts of battery terminals may cause burns or fires.
- Fracture /cracking of the working accessory;
Never throw batteries to fireplaces. - Damage of hearing when appropriate hearing protectors are not used ;
Li-Ion