Truper 102490, Руководство пользователя

Страница: 9 / 28

9
Start up
D
C
F
E
• To turn on the tool, hold the auxiliary handle (
E
) firmly with
one hand and with the other press the switch latch ( C ) and
pull the switch trigger (
D
).
• Fully depress the switch trigger.
• The switch lock prevents accidental
starting. NEVER use the tool if it starts just by squeezing the
switch trigger (
D
) and without depressing the switch lock
( C ). Go to a Authorized Service Center
to repair the tools BEFORE using it.
• To turn the tool off, release the switch trigger so it returns
to the “OFF” position.
• Before inserting the batteries in the tool,
always check that the switch trigger and its safety are
activated correctly and return to the "OFF" position when
released.
Turning ON
• Press the lock button ( F ), and then rotate the handle to
adjust the angle. Once the desired angle is set, release the
button to lock it.
• The handle angle can be adjusted to either the right or the
left up to 90° in 45° increments.
Handle Angle Adjustment
• Be careful not to touch the blades when
installing or removing the blade cover.
• To remove the cover, press where the arrows indicate and
pull the cover out.
• To put the sheath back on, insert the blade into the sheath
as far as it will go so that it is secured by the sheath itself.
Blade Sheath
CAUTION
WARNING
WARNING
ENGLISH