Truper 102490, Руководство пользователя

Страница: 10 / 28

Always keep both hands on the tool
handles.
10
ESPAÑOL
Operation
A
B
• Do not cut branches of 13cmm diameter ( A ) with the tool.
Cut branches 10 cm below the cutting height using branch
cutters before using the tool ( B ).
• Do not cut dead trees or similar hard objects. Doing so
may damage the tool.
• Do not trim grass or brush while using the cutting blades.
The cutting blades may become entangled in the grass or
brush.
Working conditions
• Hold the tool with both hands and turn the tool on as
instructed on page 9.
• Tilt the blade in the cutting direction and move it calmly
and slowly at a speed of 3 to 4 seconds per meter.
Basic Operation
• To cut the top of a hedge evenly, tie a hedge at the
height the hedge should be.
• Use a string as a reference so that the blade maintains
the same height throughout the cut.
• To cut the side of the hedge evenly, cut from the bottom
down to the top, aligning the blade to the edge of the
hedge.
• The above point also applies to shaping the hedge (box
trimming, rounding, rtc.), trim from the root to the top for
a good finish.
Cutting tips
10 cm
Tilt angle
Cutting
direction
WARNING
ENGLISH