Trumpf TruTool S 350, Руководство оператора

Страница: 7 / 24

E464EN_04.DOC
Description
7
2.2 Technical data TruTool S 350
Rest of the world USA
Values Values Values Values
Voltage 230 V 120 V 110 V 120 V
Frequency 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
•
Steel
400 N/mm²
•
Steel
600 N/mm²
•
Steel
800 N/mm²
•
Aluminium
250 N/mm²
3.5 mm
(Coil
3.0 mm)
3.0 mm
(Coil
2.5 mm)
2.0 mm
(Coil
1.5 mm)
4.0 mm 3.5 mm
(Coil
3.0 mm)
3.0 mm
(Coil
2.5 mm)
2.0 mm
(Coil
1.5 mm)
4.0 mm 3.5 mm
(Coil
3.0 mm)
3.0 mm
(Coil
2.5 mm)
2.0 mm
(Coil
1.5 mm)
4.0 mm 0.138 in
0.12 in
0.12 in
0.1 in
0.079 in
0.06 in
0.16 in
Working speed 4-6 m/min 4-6 m/min 4-6 m/min 13-20 ft./min
Nominal power
consumption 1400 W 1200 W 1140 W 1200 W
Stroke rate
with idle run 1640/min 1480/min 1480/min 1480/min
Weight 5.6 kg 5.6 kg 5.6 kg 12.4 lbs
Smallest radius
with right/left
cutouts 16 mm 16 mm 16 mm 0.623 in
Starting hole
diameter 50 mm 50 mm 50 mm 1.97 in
Protective
insulation Class II Class II Class II Class II
Technical data
Noise and vibration Measured values in accordance
with EN 50144
A-weighted sound level Typically 86 dB(A)
A-weighted acoustic power level Typically 94 dB(A)
Hand-arm vibration Typically less than or equal
to 2.7 m/s²
Measured values for noise and vibration
Note
The measured values specified above may be exceeded while
working.
Table 1
Table 2