Trumpf TruTool S 350, Руководство оператора

Страница: 22 / 24

22
Wearing parts
E464EN_04.DOC
6. Wearing parts
Designation Material number
2 Standard blade for the machining of
mild steel 140451
2 Chromium steel blades for the
machining of high-tensile sheets 140452
Wearing parts
Note
Moving cutter blade (upper blade) and fixed cutter blade (lower
blade) are identical in shape and can be used interchangeably
(above or below).
All blades have two cutting edges. They are non-regrindable
"2-way multi-edge or throw-away cutters".
To ensure fast delivery of the correct original and wearing parts:
1. Give the order number.
2. Enter further ordering information:
–
Voltage information
–
Number of pieces
–
Machine type
3. Specify complete shipping information:
–
Correct address.
–
Preferred delivery type (e.g. air mail, courier, express mail,
ordinary freight, parcel post).
4. Send the order to the TRUMPF representative office. For
TRUMPF service addresses, see the address list at the end of
the document.
Table 7
Ordering wearing parts