Trumpf TruTool S 350, Руководство оператора

Страница: 17 / 24

E464EN_04.DOC
Operation
17
4. Operation
Caution
Damage to property possible due to too-high network
voltage!
Damage to the motor
¾
Check the power supply. The power supply voltage must
correspond to the specifications on the machine type plate.
¾
When using an extension cord which is longer than 5 m, take
care to ensure that it has a line diameter of at least 2.5 mm
²
.
Caution
Danger of injury possible due to incorrect handling!
¾
When working with the machine, always ensure that it is
positioned securely.
¾
Never touch the tool while the machine is running.
¾
Always guide the machine away from the body while working
The appliance may switch off prematurely when affected by
electromagnetic disruptions. The appliance will resume operation
once the faults have been cleared.
If the motor temperature is too high, the motor will switch off.
The red indicator light (LED) with the motor lights up.
¾
Allow the machine to run in idle until it has cooled down.
The machine can be operated again normally after it has cooled
down.
Electromagnetic
interference
Motor overload protection