TrueTime IRIG NTS-100, Руководство пользователя

Страница: 36 / 75

1/20/97
N N T T S S - - 2 2 0 0 1 1 . . M M A A N N 3 3 - - 2 2 2 2 R R e e v v . . A A
Sample request: F13<CR>
Response: F13 02.000000000<CR><LF>
3.37 FUNCTION 18 - SOFTWARE VERSION REQUEST
3.37.1 Use Serial I/O Function F18 to obtain information about the current version of the
software installed in the unit. Send the string:
F18<CR>
3.37.2 The unit will respond with a string no longer that 80 characters, such as:
TRUETIME Mk III sys ver 001 NTS V1.000 182-7002v001<CR><LF>
3.37.3 This string indicates that the system software is version 001, the Network Time Server-
specific software is version 1.000 and the specific EPROM image is 182-7002, version
001.
3.38 FUNCTION 36 - NTS-100 CONFIGURATION ENTRY/REQUEST
3.38.1 Use Serial I/O Function F36 to obtain information about the current NTS-100
configuration or to change the setup. Changing the network related fields of the
configuration will cause a reset of the NTS-100 module.
Ethernet Address
3.38.2 The ethernet address is a six byte, hexadecimal value specific to each NTS-100 module.
The first three bytes are registered to TrueTime Inc, and the last three bytes are the hex
value of the unit’s unique number. The ethernet address of the NTS-100 is a fixed
address established at the factory. To request the ethernet address of the NTS-100
module, send the string:
F36 EA<CR>
3.38.3 The unit will respond with:
F36 EA:00-A0-69-xx-xx-xx<CR><LF>
where “xx-xx-xx” are the six hex digits of the unit’s unique address. Attempts to set
this field will be rejected with a syntax error message.
IP Address
3.38.4 To obtain the IP address of the NTS-100 module, send the string:
F36 IP<CR>
3.38.5 The unit will respond with a string of the form:
F36 IP:nnn.nnn.nnn.nnn<CR><LF>
where “nnn.nnn.nnn.nnn” is the dotted decimal address notation. To set the IP address
and restart the NTS-100, send a string of the form: