TrueTime IRIG NTS-100, Руководство пользователя

Страница: 33 / 75

1/20/97
N N T T S S - - 2 2 0 0 1 1 . . M M A A N N 3 3 - - 1 1 9 9 R R e e v v . . A A
where
<SOH>
= ASCII Start-of-Header character (HEX 01)
<CR> = ASCII Carriage Return character (HEX 0D)
<LF> = ASCII Line Feed character (HEX 0A)
DDD = day-of-year
HH = hours
MM = minutes
SS = seconds
mmm = milliseconds
: = colon separator
Q = time quality character. Refer to Function 08 for
values
Sample entry: F09<CR>
Second entry: T
Response: <SOH>128:20:30:04.357*<CR><LF>
3.35 FUNCTION 11 - TIME OUTPUT FORMAT ENTRY/REQUEST
3.35.1 Use Serial I/O Function 11 to request or enter the time output string format that is used
by Serial I/O Functions F08 and F09.
3.35.2 The format upon power-up will be the format that was in use just before power-down. To
request the return of the present format send F11<CR> to the Serial I/O port. The string
returned will contain X's in the positions that are omitted in the time output string.
3.35.3 When shipped, the format string will be set to the "null" string, causing the strings of the
F08 and F09 outputs to take on their default values.
F08: <SOH>DDD:HH:MM:SSQ<CR><LF>
(Once per second time output mode)
Note: Milliseconds are never present in the output of F08 mode regardless of the
format string entered with F11.
F09: <SOH>DDD:HH:MM:SS.mmmQ<CR><LF>
(Time on demand output mode)
where
<SOH>
= ASCII Start-of-Header character (HEX 01)
<CR> = ASCII Carriage Return character (HEX 0D)
<LF> = ASCII Line Feed character (HEX OA)
DDD = day-of-year
HH = hours
MM = minutes
SS = seconds
. = ASCII decimal point
mmm = milliseconds
: = colon separator
Q = time quality character. Refer to Function 08 for
values.