True RESIDENTIAL ADA HEIGHT TUBADA-24-R/L-RG-A-S Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 74

background image

TRUE RESIDENTIAL

®

TEC_TM_102 REV. B

02/02/2022

Page 44 of 74

C A B I N E T S E T U P

Follow the instructions below to install door overlay
panels. Door panel height and positioning varies by
application; for more details, please see “Standard
Installation Plan Views” (page 16) or “Optional
Installation Plan Views” (page 21). For custom panel
specifications, please see “Custom Overlay Panel
Specifications” starting on page 25.

NOTE: DO NOT INSTALL A SOLID PANEL ON
A GL ASS DOOR. THIS MAY CAUSE MOISTURE
TO FORM BEHIND THE PANEL, RESULTING
IN DAMAGE. BE SURE TO INSTALL A LOCK

BEFORE

INSTALLING THE DOOR PANEL.

REQUIRED TOOLS

Required tools include (but may not be limited to)
the following:

• Surface protection*

• 2+ Clamps ≥ 2" (51 mm)

• 1/8" Hex Head Allen Wrench

• Phillips Bit Driver

• 1/8" Dill Bit

• (Qty 6) #6 x 1/2" Screws**

• Drill

*C ardboard, moving blanket, foam padding, etc.
**Screw t ype varies by panel material.

PROCEDURE
NOTE: FIGURES SHOW A LEF T-HINGED DOOR.

1. Carefully lay the door overlay panel on a protected

surface.

2. With a 1/8" hex head Allen wrench, loosen the

cabinet hinge bolts. Then, remove the door.
See fig. 1.

NOTE: DO NOT REMOVE THE HINGE FROM
THE DOOR ASSEMBLY.

NOTE: IF CONVERTING FROM STAINLESS
STEEL DOOR SKIN TO AN OVERL AY
PANEL, REMOVE THE DOOR SKIN BEFORE
POSITIONING THE DOOR FRONT ON THE
PANEL. DO NOT REMOVE THE DOOR SKIN
BR ACK ET FROM THE DOOR FRONT.
SEE FIG. 2.

3. Remove the gasket. See fig. 3.

4. Place the door front face down on the overlay

panel. Align the door front and panel edges. See
fig. 4.

NOTE: THE PANEL’S VERTICAL
POSITIONING AND LENGTH VARY
BY INSTALL ATION. SEE “OP TIONAL
INSTALL ATIONS” (PAGE #).

5. Clamp the door and panel. See fig. 4.

NOTE: IF THE CL AMP JAWS ARE NOT
PADDED, INSERT PADDING BET WEEN THE
CL AMP AND THE OVERL AY TO PROTECT
THE PANEL’S FINISH.

6. If desired, install a handle before proceeding to the

next step. For best installation. Fasten the handle
with recessed screws.

7. With a 1/8" drill bit, carefully drill pilot holes into

the door front. See fig. 5.

NOTE: TAK E CARE TO NOT DRILL THROUGH
THE FRONT OF THE PANEL.

8. Fasten the overlay panel to the door front. Then,

remove the clamps. See fig. 6.

9. Install the door gasket. Verify the gasket is fully

seated in the gasket channel. See fig. 7.

10. Install the door assembly. Verify the door closes

correctly and the gasket seals without gaps (see
fig. 8). Adjust the door as needed; see “Door
Adjustment” (page 66).

DOOR OVERL AY PANEL INS TALL ATION

«
...
42
43
44
45
46
...
»

Содержание RESIDENTIAL ADA HEIGHT TUBADA-24-R/L-RG-A-S











































































Отзывы:

Нет отзывов

Похожие инструкции для RESIDENTIAL ADA HEIGHT TUBADA-24-R/L-RG-A-S

10? Single Door Manual Defrost

Бренд: GE Страницы: 16

Бренд: GE Страницы: 2

Бренд: Beverage-Air Страницы: 10

Бренд: STATESMAN Страницы: 16

Бренд: Magic Chef Страницы: 14

Бренд: U-Line Страницы: 15

Бренд: Adler Europe Страницы: 112

Бренд: Perlick Страницы: 8

Бренд: Thermador Страницы: 48

Бренд: JUNO Страницы: 24

Бренд: Dometic Страницы: 120

Бренд: Hanseatic Страницы: 56

Бренд: Dobinsons Страницы: 12

Бренд: U-Line Страницы: 28

Бренд: Iceking Страницы: 20

Бренд: Frigoboat Страницы: 28

Silhouette DBC514BLS

Бренд: Danby Страницы: 32

Бренд: ASCOLI Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды