True RESIDENTIAL ADA HEIGHT TUBADA-24-R/L-RG-A-S, Руководство по установке и инструкция пользователя

Страница: 34 / 74

TRUE RESIDENTIAL
®
TEC_TM_102 REV. B 02/02/2022 Page 34 of 74
UNCR ATING
REQUIRED TOOLS
Required tools include (but may not be limited to) the
following:
• Cutting Tool
• Hammer
• Crowbar
• Phillips Screwdriver
• Floor Protector
PROCEDURE
The following procedure is recommended for uncrating
the unit:
1. Remove the outer packaging (cardboard and clear
plastic). See fig. 1. Inspect for concealed damage.
Again, immediately file a claim with the freight carrier
if there is damage
.
2. Cut the plastic band and remove the Styrofoam
block. See fig. 2.
NOTE: MOVE THE UNIT AS CLOSE AS
POSSIBLE TO ITS FINAL LOCATION BEFORE
REMOVING THE SKID.
3. Position the floor protector next to the skid.
4. Carefully lift the unit off the skid and place the unit
on the floor protector.
NOTE: DO NOT LIF T THE CABINET BY THE
COUNTERTOPS, DOORS, DR AWERS, OR
GRILLS.
5. Remove the interior packaging.
NOTE: K EYS FOR THE UNIT ARE INSIDE
THIS PACK ET.
6. If applicable, remove the wire shelving, shelf clips,
and/or floor wine cradle packed on top of the unit.
For shelving installation instructions, see page 24.
I N S T A L L A T I O N
FIG. 1. Pull the cardboard from the pallet.
FIG. 2. Remove the foam block after moving the unit
as close as possible to the final installation location.