True RESIDENTIAL ADA HEIGHT TUBADA-24-R/L-RG-A-S, Руководство по установке и инструкция пользователя

Страница: 36 / 74

TRUE RESIDENTIAL
®
TEC_TM_102 REV. B 02/02/2022 Page 36 of 74
I N S T A L L A T I O N
3. Position the anti-tip brackets and mark the
mounting hole locations.
4. With a 1/8" drill bit, drill pilot holes at the marked
locations.
NOTE: BE SURE TO USE A DRILL BIT
APPROPRIATE FOR YOUR FLOORING
MATERIAL.
5. With the appropriate provided hardware, install the
anti-tip brackets. See fig. 2.
NOTE: THE CONCRETE SCREWS ARE BLUE.
6. Carefully position the unit in its final installation
location. Be sure the rear leveling legs slide into
the anti-tip brackets. See fig. 3.
NOTE: DO NOT LIF T THE CABINET BY THE
COUNTERTOPS, DOORS, DR AWERS, OR
GRILLS.
LE VELING LEGS
Standard leveling legs are provided to assist with
leveling the cabinet.
PROCEDURE
With access to the bottom of the cabinet, turn the
leveling legs to adjust the level as needed.
See figs. 1 and 2.
2-1 /2 " (64mm) LE VELING LEGS
2-1/2" (64 mm) leveling legs raise the minimum height
of the unit to 33-3/4" (857.25 mm). The leveling
legs are adjustable up to 1" (25.4 mm), raising the
maximum height of the unit to 34-3/4" (882.7 mm).
If so desired, you can order a taller grill to hide
the gap caused by the 2-1/2" leveling legs. Please
contact our parts department at
844-849-6226
or
TrueResidentialParts@TrueMfg.com .
PROCEDURE
1. Access the bottom of the cabinet.
2. Remove the existing standard leveling legs.
See fig. 3.
3. Thread the new leveling legs into the bottom of
the cabinet. See fig. 4.
4. Verify the level of the cabinet. If the cabinet is
not level, gently lift and support the low end of
the cabinet. Then, adjust the bottom stem of the
leveling leg to level and support the cabinet.
See fig. 5.
FIG. 1. Turn the leveling legs clockwise to lower the unit.
FIG. 2.
Turn the leveling legs counterclockwise to raise the unit.
FIG. 5. Turn the bottom stem to
level the cabinet.
FIG. 3. Remove the existing
leveling legs.
FIG. 4. Screw in the leveling legs.