22
TN 20B INSERT
110618-28
©PACIFIC ENERGY FIREPLACE
PRODUCTS LTD.
Figure22:Remaining side wall bricks installation.
Figure21:Floor bricks laying lengthwise.
Figure 20: Bricks against rear wall.
Brick rails
Figure 19: Firebox and brick rails.
Firebrick Installation
The package contains 20 full-size firebricks. With the insert in its final position, install the firebricks as follows:
1. Place the first brick up under the rear brick rail (Figure 16) and slide it to either the far left or far right
(Figure 19).
2. Place 3 more bricks up under the rear brick rail to complete the rear brick placement (Figure 19).
3. Place the floor bricks as shown in Figure 20.
4. On both the right and left sides, place the first side wall brick under the Brick Retainer and on top
of the floor bricks and slide it all the way to the back, so that it is up against the rear wall bricks.
5. Using the same method, place three more bricks along one of the side walls. (Figure 20)
6. Repeat the side wall brick installation on the opposite side to complete the firebrick installation.
