20
TN 20B INSERT
110618-28
©PACIFIC ENERGY FIREPLACE
PRODUCTS LTD.
1.
Remove the surround by lifting to disengage the securing hooks at the top and bottom of the surround
sides and pulling towards the front of the unit.
(Fig. #14)
2.
Using a Torx T20 Screwdriver, remove the Blower Control from the side panel.
3.
With a 3/8” socket, remove the two bolts securing the blower mounting assembly to the unit.
(Fig. #15)
Mounting
bolts
Blower
Figure14:surround removal.
Blower Maintenance / Removal
The blower requires annual cleaning to remove buildup on the blades. More frequent cleaning may be
required if room conditions are dusty or you have pets. THe cleaning of the Blower can be done easily by the
homeowner but we recommend having this done by a qualified service technician who can inspect the entire
unit at the same time.
To get access to the blower follow step 1 then gently vacuum any dust and hair from the blower inlets and
motor.
Figure15:TN20.INSA.fan controls.
Figure16:TN20 INSB Fan and Casing
removal .
