True North TN10, Инструкция по установке и эксплуатации, Страница: 3 / 28

5055.549-A
TN10 NA 080617-28 3
Specifications
EPA Certified Emissions 1.4 grams per hour
LHV Tested Efficiency 1 80.4%
HHV Tested Efficiency 2 72.6%
EPA BTU Output 3 13,084 - 17,623 btu/hr
Peak BTU/Hr Output 4 24,400 btu/hr.
Maximum Wood Length 14 inches
Ideal Wood Length 12 inches
Fuel Seasoned Cord wood
1 Weighted Average Lower Heating Value (LHV) efficiency as tested using CSA
B415 Performance testing of solid-fuel-burning heating appliances. LHV assumes
the moisture is already in a vapour state so there is no loss of energy
2 Weighted Average Higher Heating Value (HHV) efficiency as tested using CSA
B415 Performance testing of solid-fuel-burning heating appliances. HHV includes
the energy required to vaporize the water in the fuel
3 The range of BTU outputs is based on efficiency using CSA B415 Performance
testing of solid-fuel-burning heating appliances and burn rates from the low and
high EPA tests using Douglas Fir dimensional lumber.
4 The Peak BTU/hr is based on efficiency using CSA B415 Performance testing
of solid-fuel-burning heating appliances, the Maximum one hour High burn rate
from the High Burn EPA test and the BTU content of cord wood (8600 btu/lb).
Experience will give you the right settings for proper combustion and efficient burning.
Remember the correct air inlet control setting is affected by variables such as type of wood,
outside temperature, chimney size and weather conditions. With practice, you will become
proficient in operating your heater and will obtain the performance for which it was designed.
Efficiency and BTU Output