Troxler Enhanced RoadReader Plus 3451, Руководство по эксплуатации и инструкции

Страница: 148 / 247

Model 3451 7–
STAT TEST
As described on page C–2, erratic readings, or readings that seem to
fluctuate, may indicate a problem with the gauge. If the readings are
suspect, the operator can perform a
stat test , or statistical stability
test, to validate the normal operation of the gauge.
To view the results of the most recent stat test, press the
〈
STAT Test
〉
button on the
Print Active Project Menu
. As
shown in Figure 7–12, the Data Manager software displays the stat
test results.
DRIFT TEST
As described on page C–5, if the gauge passes the stat test, but
shows long-term drift between measurements, the operator can
perform a
drift test to check the long-term drift.
To view the results of the most recent drift test, press the
〈
Drift Test
〉
button on the Print Active Project Menu . As shown
in Figure 7–13, the Data Manager software displays the drift test
results.
SEND TO PRINTER
To print the configuration of the active project, press the
〈
Send to Printer
〉
button on the
Print Active Project Menu
.
The software prompts the operator to ensure that a printer is
connected to the computer and that the printer is powered on. After
doing so, press
〈
OK
〉
. The software sends the project configuration
to the default printer.
SEND TO FILE
To save the configuration of the active project as a comma-
delimited text (
.txt ) file, press the
〈
Send to File
〉
button on the
Print Active Project Menu
. In the resulting display, enter a file
name and press
〈
Open
〉
to save the file.
7
. DAT
A
M
ANAG
E
R