Trotec TDP 370 E, Оригинальное руководство пользователя, Страница: 4 / 17

4 EN deep well pump TDP 370 E / TDP 750 E
Intended use
The device TDP 370 E / TDP 750 E is exclusively designed for
pumping clear water from greater depths serving as service
water for the home and garden.
The device can be applied for the following purposes:
• water withdrawal from wells and shafts
• rain water withdrawal from cisterns
In either case, the water must comply with the conditions
specified in the technical data.
The device is fully submersible (watertight encapsulation) and
can be immersed up to 20 m into the pumping medium.
Improper use
• The device is not suitable for continuous operation (e.g. as
recirculation pump for ponds).
• Using the device in swimming pools and the like is
prohibited.
• The device is not suitable as permanent, automatic
overflow protection (of e.g. wells or fountains or for the
regulation of the groundwater level). Use a stationary
waste water pumping system for building and property
drainage for these purposes.
• The device is not suitable for increasing the pressure of
existing water supply networks.
• The device is not suitable for pumping potable water.
• The device must not be used for aggressive, abrasive,
caustic, corrosive, combustible or explosive pumping
media, e.g.:
– brine
– sandy water
– food
– cleaning agents
– fuels (e.g. petrol, diesel)
– oils
– greases
– petroleum
– nitro-cellulose thinner
– waste water from lavatories and urinal installations
• The device must not be used at freezing temperatures.
• Any unauthorised modifications, alterations or structural
changes to the device are forbidden.
Personnel qualifications
People who use this device must:
• be aware of the dangers that occur when working with
electric devices in damp areas.
• have read and understood the instructions, especially the
Safety chapter.
Safety signs and labels on the device
Note
Do not remove any safety signs, stickers or labels from
the device. Keep all safety signs, stickers and labels in
legible condition.
The following safety signs and labels are attached to the device:
This label indicates the following safety warnings:
• Prevent dry running of the pump! Before start-up the pump
must be completely submerged in the pumping medium.
• Carefully read the instructions before starting or using the
pump.
This label indicates the following safety warnings:
• The device is not suitable for water with high sand content!
Do not use at freezing temperatures
This symbol indicates that the device must be protected
from frost.
Keep out of the reach of children – not a toy
This symbol indicates that the device is not a toy and is
thus not suitable for children.
Do not pull the mains plug by the power cable
This symbol indicates that you must not pull the mains
plug out of the socket by the power cable.
Staying in water prohibited
This symbol indicates that the device must not be
operated with persons or animals in the water.
Not suitable for pumping potable water
This symbol indicates that the device is not suitable for
pumping potable water.