Trotec Rayjet 300, Руководство пользователя

Страница: 30 / 40

State Library of Queensland Wiki 26/36 Rayjet 300 Laser Cutter
2019/08/01 08:17 Rayjet 300 Laser Cutter
—————————————–
Test Date 15 Aug 2016 Test Completed By Mick Byrne. A bunnings product name was provided by
applicant and from there an MSDS was sourced for this material. This product is also certified as low
Formaldehyde.
http://www.dashwoodtimber.co.nz/downloads/Structural_Plywood_Properties_&_Applications_Manual_
March_2008.pdf
5)
http://www.ewp.asn.au/library/downloads/ewpaa_formaldehyde_emmisions.pdf
6)
Slate
Test Date 28 Feb 2019 Test Completed By P. Gullberg.
This material can only be engraved ,not cut using the Rayjet. Settings come directly from Trotec's
website.
The bitmap gradient and title test were engraved using error diffusion. The Rayjet struggles with the
deeper engravings which end up looking like the more shallow engravings. The Engrave settings text
is engraved using the Trotec recommended settings. Smoke levels were average.
Engraving: 60% power 100% Speed
Japanese Polyester
Test Date Aug 2016
PETG
Copper wire test passed and OK'd for laser
Peter Musk Nov 2017