Trotec Rayjet 300, Руководство пользователя

Страница: 26 / 40

State Library of Queensland Wiki 22/36 Rayjet 300 Laser Cutter
2019/08/01 08:17 Rayjet 300 Laser Cutter
Unlock top filter with large allan key from service kit 1.
roll-up rockwool and place in garbage bag 2.
Check filth level on filter liner (the cream coloured foam) 3.
if there are visible beads of gunk, then discard into bin 1.
wipe down internals of top filter 4.
replace filter liner 5.
tear off a section of rockwool, make a layer about 1 inch thick 6.
lay rockwool on top of filter liner 7.
close and lock top filter 8.
update filter maintenance panel 9.
Baseline Measurements
This is the base line measurement for the Atmos 500. Any time the filter components are changed
refer to these settings.
Activated Carbon only 27%
Activated (new) HEPA only 27-28 %
Activated (new) HEPA + fiber filter 29 %
Activated (new) HEPA + fiber filter + foam
34%