Trotec Rayjet 300, Руководство пользователя

Страница: 25 / 40

State Library of Queensland Wiki 21/36 Rayjet 300 Laser Cutter
2019/08/01 08:17 Rayjet 300 Laser Cutter
Inspect and Clean Mirror
blow off the mirror the squeezy blower 1.
Check the surface of the mirror again 2.
If necessary clean the mirror 3.
Spray with cleaner 1.
Put on gloves 2.
tilt to wash away coarse soiling 3.
Dab dry with a clean cloth 4.
Spray again and wipe clean with a new damp cloth (spray cloth with cleaner) 5.
if necessary dry with a clean cloth 6.
Replace Mirror 7.
Inspect and Clean Lens
blow off the mirror the squeezy blower 1.
Check the surface of the lens again 2.
If necessary clean the lens 3.
Hold the lens assembly by its edge and spray 1.
While holding the lens at an angle, flush both surfaces of the lens, to wash away coarse 2.
soiling
Put the lens on a clean lens cleaning tissue
3.
Put on gloves 4.
Spray some lens cleaning liquid on one side of the lens 5.
Leave the liquid to take effect for approximately one minute 6.
Gently wipe it away with lens cleaning tissues soaked with lens cleaning liquid 7.
Dry this side of the lens with dry lens cleaning tissues and repeat the cleaning process on 8.
the other side of the lens
Examine the lens. If it is still soiled, repeat the cleaning process until the lens is clean 4.
this process may have to be repeated - with baked on crud expect at least five 1.
cleaning cycles
Carefully insert the lens holder with lens into the working head 5.
The side marked “top” is facing up. This is guaranteed by the design of the lens holder 6.
Tighten the lens holder - turning counter-clockwise for a 2 inch (black) lens and clockwise for 7.
a 1.5 (red) lense
Laser Cutter Air Filter Maintenance
How often should this be done? Maintenance of the Atmos500 is essential to keep fumes and
particulates from the Fabrication Lab air. The top filter is augmented by a thin layer of rockwool
insulation, which is the regular consumable for the filter.
Before you start
Always wear gloves and a respirator type mask. Collect a bin liner from the cleaning store.