16
EN
spot cooling air conditioning unit PT 5300 SP
2. Clean the filter using a slightly damp, soft, lint-free cloth. If
the filter is heavily contaminated, clean it with warm water
mixed with a neutral cleaning agent.
3. Allow the filter to dry completely. Do not insert a wet filter
into the device!
4. Reinsert the air filter into the device.
Condensate discharge (manual draining)
In
cooling
mode condensate is formed, which is mostly
discharged via the exhaust air.
The remaining condensate is collected in a container within the
housing. The condensate ought to be drained regularly.
If too much condensate accumulates, the device switches off
and indicates this via the
Condensation tank full
LED (
15
). In
addition, n acoustic signal is emitted.
1. Pull the condensation tank (
3
) out of the designated
recess.
3
15
2. Empty the condensation tank.
3. Refit the emptied condensation tank into the device.
ð
The
condensation tank full
LED (
15
) goes out once you
restart the device.
Activities required after maintenance
If you want to continue using the device:
•
Reconnect the device to the mains.
If you do not intend to use the device for a considerable time:
•
Store the device according to the Transport and storage
chapter.
Technical annex
Technical data
Model
PT 5300 SP
Cooling capacity
5.3 kW
Dehumidification performance
2.70 l/h
Operating range
18 °C to 45 °C
Temperature setting range
0 °C to 35 °C
Max. air volume flow
800 m
3
/h
Mains connection
220 V – 240 V / 50 Hz
Nominal current
10 A
Type of protection
IPXO
Max. power input (cooling
operation)
2.2 kW
Sound pressure level at a
distance of 1 m
65 dB(A)
Refrigerant
R123yf
Amount of refrigerant
950 g
GWP factor
4
CO
2
equivalent
0.0038 t
Pressure suction side
1 MPa
Pressure outlet side
2.5 MPa
Max. permissible pressure
2.5 MPa
Condensation tank capacity
25 l
Dimensions (length x width x
height)
560 x 625 x 1135 mm
Minimum distance to walls and
other objects:
top:
sides:
front:
rear:
90 cm
30 cm
30 cm
30 cm
Weight
95 kg